Cisco TOPSPIN SFS 3001 Manual do Utilizador descarregar pdf (Página 12)

5. Attach the remaining two rail brackets to your rack.

a. Orient a bracket toward the back of the rack with the flange facing away from the rack. The

flange should go around the outside of the rack post, as shown in, as shown in Figure 1-3.

NOTE: If you are mounting the switch backward, the rack bracket should be installed toward the

front of the rack.

b. Secure the brackets with your screws through the back of the rack posts, as shown in Figure

1-4.

c. Repeat on both sides of the rack.

Figure 1-3: Holding Rack Bracket Against Inside of Rack

Figure 1-4: Secure Rack Brackets to Rack with Screws

6. Lift the switch unit and align the bracket on the switch with the bracket on the rack before sliding

the two sets of brackets together.

7. Carefully push the switch unit into the rack.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 29 30

Sem comentários

Cisco TOPSPIN SFS 3001 Manual do Utilizador Página 12