
113 DGVox 8 Management Console Configuration Guide
Chapter 1 - Management Console
Confidential and Proprietary Information of Vox Spectrum. Ltd.
Increase or decrease the Automatic Gain
Control value by clicking the corresponding UP
and Down button respectively.
This parameter is used to control the Caller ID
detection. In some networks, the amplitude of
the DTMF signal is very low. By reducing the
DTMF Trigger to a lower value, you will be able
to detect very low DTMF signals.
NOTE: The disadvantage of leaving this at a
lower level all time is that at lower levels, there
is a chance that noise signals may get detected
as DTMF tone.
Mention the channel number that is to be live
monitored. When a call lands of the specified
channel, the call will be recorded and played
back in real time via the VoxCaptvs voice
logger speakers.
Increase or decrease the VoxCaptvs speaker
volume by clicking the corresponding UP and
Down button respectively.
This parameter is used in Silence mode
detection. The defined parameter value
indicates the number of second’s voice logger
has to wait, after the energy level has gone
below Vox sensitivity level to end the call.
Select a compression type in which the
recorded files are to be stored.
Set the base channel number for the
VoxCaptvs voice logger. Base channel number
will be used for identifying different devices
when connected to the VoxCaptvs application.
Displays the folder path, where the VoxCaptvs
data is being saved.
Displays the firmware version of VoxCaptvs
voice logger.
Displays the voice logger device serial number
Comentários a estes Manuais