Cisco 3800 Series Manual do Utilizador descarregar pdf (Página 122)

Installing and Upgrading Internal Components in Cisco 3800 Series Routers

OL-5975-04

AIM Installation and Removal

Figure 59 Plastic Standoff Orientation

Step 5

Insert the connector on the AIM into the connector on the motherboard. Press firmly on the AIM until it

seats onto the connector. The plastic standoff must snap into the hole in the AIM board. See Figure 60.

Step 6 Insert the machine-thread metal screws from the accessory kit through the AIM into the metal standoffs.

See Figure 60. Carefully tighten the screws with a number 1 Phillips screwdriver.

Step 7 Check that the AIM is installed correctly on the motherboard. See Figure 60.

Figure 60 AIM Installed on a Motherboard

82620

AIM end

Locking end

58696

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 137 138

Sem comentários

Cisco 3800 Series Manual do Utilizador Página 122