Cisco MICA V110 Manual do Utilizador descarregar pdf

Basic V110 for MICA Modems on Cisco Access Servers 1

Basic V110 for MICA Modems on

Cisco Access Servers

Feature Overview

This feature allows V.110 calls to be originated and terminated over ISDN. The V.110

recommendation of the ITU-T rate adapts a low speed connection to an ISDN-B channel allowing

the remote station or terminal adaptor to use the fast call set-up times offered by ISDN. This feature

enables GSM wireless connectivity.

This document describes the Cisco IOS commands and AT commands required to support V.110 on

MICA modems for AS5X00 Access Servers.

This MICA V.110 implementation supports 60 modems per board on the Cisco AS5300 and supports

other connect standards (V.34, V.90, etc.) in addition to V.110. Modems are not dedicated to V.110

only and are allocated dynamically. On the Cisco AS5200, 30 modems per board is supported and

72 modems per board is supported on the Cisco AS5800.

This V.110 implementation for calls on MICA modems are managed by special boardware and

modem code, along with the appropriate Cisco IOS image, in a manner similar to other modulation

standards.

Note This document is in development. Portions of this document may not be complete or

developed according to the current documentation standards. This document is subject to revision

when the content is available and developed further. Please check the online version periodically

until the document is completed according to the usual documentation standards.

Feature Summary

• Bearer Rate supported range from 600 bps to 38400 bps.

• Modem Management is supported.

• Modem Log for V.110 calls is supported.

• show modem (Number of connections at specific line speeds is supported.)

• show modem (Number of calls counters supported)

• show modem (Display of Tx/Rx line speeds is supported.)

• show modem version is supported.

• show modem configuration is supported.

• show modem operational-status is supported.

• ATDI command is added to AT command set for V.110 modem dialouts.

1 2 3 4 5 6 7 8 9 10

Resumo do Conteúdo

Página 1 - Cisco Access Servers

Basic V110 for MICA Modems on Cisco Access Servers 1Basic V110 for MICA Modems on Cisco Access ServersFeature OverviewThis feature allows V.110 calls

Página 2 - Restrictions

10Cisco IOS Release 12.0(4)XI1By specifying a value 8 in S29, the user causes the remote modem to implicitly assume that a V.110 connection is to be e

Página 3 - Supported MIBs and RFCs

2Cisco IOS Release 12.0(4)XI1Note This feature is distinct from the Asynchronous Management Protocol for V.110 Terminal Adaptor Module that runs in th

Página 4 - List of Terms and Acronyms

Related Features and Technologies Basic V110 for MICA Modems on Cisco Access Servers 3— 64k bpsRelated Features and TechnologiesThis feature requires

Página 5 - • show modem connect-speeds

4Cisco IOS Release 12.0(4)XI1List of Terms and AcronymsConfiguration TasksThere are no configuration tasks. All commands in this feature are modified

Página 6 - Cisco IOS Release 12.0(4)XI1

show Command Examples Basic V110 for MICA Modems on Cisco Access Servers 5http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/dial_

Página 7 - show modem log

6Cisco IOS Release 12.0(4)XI1 Last clearing of "show modem" counters never 23 incoming completes, 2 incoming failures 0 outgoing com

Página 8

show Command Examples Basic V110 for MICA Modems on Cisco Access Servers 7 Reason (=0 ): no disconnect has yet occurred Parameter #1 Connect Pr

Página 9

8Cisco IOS Release 12.0(4)XI1 State: Steady 4d06h :RS232 event: RTS, DTR, CTS, DCD 4d06h :Static event: Connect Protocol: ISDN M

Página 10 - Debug Commands

ATDI Command (place V.110 call) Basic V110 for MICA Modems on Cisco Access Servers 9 Compression: None Connected Standard: V.110 TX,RX Symb

Comentários a estes Manuais

Sem comentários

Cisco MICA V110 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Hardware Cisco MICA V110. Cisco MICA V110 User Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Cisco MICA V110