Cisco Expansion Module Guia de Instalação descarregar pdf (Página 16)

Send documentation comments to [email protected]

2-16

Cisco Nexus 5000 Series Hardware Installation Guide

OL-15902-01

Chapter 2 Cisco Nexus 5000 Series Overview

Cisco Nexus 5020 Switch

Supported SFP Transceivers

The Cisco Nexus 5020 switch supports both SFP+ Ethernet transceivers and SFP Fibre Channel

transceivers.

This section includes the following sections:

• SFP+ Transceivers, page 2-16

• SFP+ Copper Cables, page 2-16

• SFP Fiber Channel Transceivers, page 2-17

SFP+ Transceivers

The enhanced Small-Form-Factor Pluggable (SFP+) 10-Gigabit Ethernet transceiver module is a

bidirectional device with a transmitter and receiver in the same physical package. SeeTable 2-4 . It has

a 20-pin connector on the electrical interface and duplex LC connector on the optical interface.The Cisco

Nexus 5020 switch supports the SFP-10G-SR transceiver.

Table 2-4 SFP+ Transceivers

Figure 2-18 shows the SFP-10G-SR transceiver.

Figure 2-18 SFP+ 10-Gigabit Ethernet Transceiver Module

SFP+ Copper Cables

Copper cables are available for use with the 10-Gigabit Ethernet SFP+ module. See Table 2-5. The

cables come in the following lengths:

• 1m, 30AWG

• 3m, 28-30 AWG

Model Description

SFP-10G-SR

10-Gigabit Ethernet—short range SFP+ module

187492

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Sem comentários

Cisco Expansion Module Guia de Instalação Página 16