Cisco BayTech DS Series Manual do Utilizador descarregar pdf (Página 5)

DS62-MD4 Network/Modem Host Module

Figure 2

Attention Character

If no Baytech power strips are to be controlled through this Data Server, skip this step. Pressing the

Attention Character 5 consecutive times will access the network main menu. The Default is a semi-

colon (;). Select this option to change the attention character. The DS displays the following:

Attention Character is........... ;

Enter Attention Character :

Figure 3

Access Control

This security feature allows the admin to enable or disable usernames and passwords for both network

and serial port access.

If either login has been enabled you will get a prompt similar to the following:

DS62 Ethernet Host module

Revision F 2.10.05 Module 1

Hardware 1.01 Serial number 509 colilo version 1.05.01

Status..........................1 Current setting of the module

Serial Port Configuration.......2 Setup the port configuration menu

Serial Port Device Name.........3 Name the port

Attention Character.............4 Pressing the attention character 5

consecutive times will return back to the

main menu.

Disconnect Timeguard............5 If more data is received within the delay

period, the DS series treats the

character as data, not an attention

character; thereby preventing unwanted

port disconnection.

Connect Port ID Echo............6 Enable port echo by name or module&port#

Connection/Radius/TACACS

Network Port Configuration......8 Network Setup IP Address

Module Name.....................9 Enter a name for the module

DS Management............... ..10 Set up Voltage/Current/Sensor thresholds

Firmware / Config Download.....11 Updates by FTP & Reset to Factory Config

Exit.........................X,CR

Enter Request :

Access Control..................1 Telnet/Serial Enable/Disable Login prompt

Manage Users....................2 Change user password or port access,

add/delete user,

Direct Port Connection..........3 Enable/Disable

Radius Configuration............4 See below for Radius menu

TACACS Configuration............5 See below for TACACS menu

Exit.........................X,CR

Enter Request :

1 2 3 4 5 6 7 8 9

Comentários a estes Manuais

Sem comentários

Cisco BayTech DS Series Manual do Utilizador Página 5

Comentários a estes Manuais

Manuais e produtos relacionados com Comutadores de rede Cisco BayTech DS Series