Cisco WMP54GS Guia do Utilizador descarregar pdf (Página 37)

Appendix A: Troubleshooting

Common Problems and Solutions

Wireless-G PCI Adapter with SpeedBooster

Appendix A: Troubleshooting

This appendix consists of two parts: “Common Problems and Solutions” and “Frequently Asked Questions.” This

appendix provides solutions to problems that may occur during the installation and operation of the Wireless-G

PCI Adapter. Read the description below to solve your problems. If you can't find an answer here, check the

Linksys website at www.linksys.com.

Common Problems and Solutions

1. The Wireless-G PCI Adapter does not work properly.

• Reinsert the Wireless-G PCI Adapter into your PC’s PCI slot.

• Right click on My Computer and select Properties. Select the device manager and click on the Network

Adapter. You will find the Wireless-G PCI Adapter if it is installed successfully. If you see the yellow

exclamation mark, the resources are conflicting. You will see the status of the Wireless-G PCI Adapter. If

there is a yellow question mark, please check the following:

• Make sure that your PC has a free IRQ (Interrupt ReQuest, a hardware interrupt on a PC.)

• Make sure that you have inserted the right adapter and installed the proper driver.

If the Wireless-G PCI Adapter does not function after attempting the above steps, remove the adapter and do

the following:

• Uninstall the driver software from your PC.

• Restart your PC and repeat the hardware and software installation as specified in this User Guide.

2. I cannot communicate with the other computers linked via Ethernet in the Infrastructure

configuration.

• Make sure that the PC to which the Wireless-G PCI Adapter is associated is powered on.

• Make sure that your Wireless-G PCI Adapter is configured on the same channel and with the same

security options as with the other computers in the Infrastructure configuration.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 55 56

Sem comentários

Cisco WMP54GS Guia do Utilizador Página 37