Cisco 12012 Informações Técnicas descarregar pdf (Página 30)

Command Reference

Release 11.2 GS

To load a Cisco IOS image on a line card, ﬁrst use the copy tftp command to download the

Cisco IOS image to a slot on one of the PCMCIA Flash memory cards. After you have downloaded

the Cisco IOS image on the Flash memory card, use the microcode command to download the image

to the line card followed by the microcode reload command to start the image. To verify that the

correct image is running on the line card, use the execute-on slot slot show version command.

For information on how to load Cisco IOS images, refer to the “Loading Images and Conﬁguration

Files” chapter in the Conﬁguration Fundamentals Conﬁguration Guide. For additional information,

refer to the “Observing System Startup and Performing a Basic Conﬁguration” chapter in the Cisco

12000 series installation and conﬁguration guides.

Examples

In the following example, the Cisco IOS software image in slot 0: is downloaded to the line card in

slot 10. This is the software image that is used when the system is booted, when a line card is inserted

or removed, or when the microcode reload global conﬁguration command is issued.

To verify that the correct version is loaded, use the execute-on slot 10 show version command.

Router(config)# microcode oc3-POS-4 flash slot0:fip.v141-7 10

Router(config)# microcode reload 10

Router(config)# exit

Router#

Related Commands

microcode reload

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 59 60

Sem comentários

Cisco 12012 Informações Técnicas Página 30