Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base Informações Técnicas descarregar pdf (Página 63)

Chapter 3. Ethernet switch interoperability 53

Figure 32. Switch Port Control / Status: Port 1

From the navigation window, we choose Control and Port. That brings us to

the Switch Port Control window shown in Figure 32. We select Port ID 1.

Then we set the Port Name to 42-01, 42 as the VLAN ID, and 01 as port

number 1. This is the first of two ports on VLAN 42.

The speed and duplex are set to AUTO-NEGOTIATE by the default and were

left unchanged in our test environment. See “Auto-speed negotiation” on

page 8.

Transmit pacing is set to DISABLE. When the pacing is on, the switch will

sense high network traffic and insert extra delays between frame

transmissions. There is no interoperability issues about transmit pacing, since

it only controls sending.

IEEE 802.1Q Connection type can be set either to Access or Hybrid.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 155 156

Sem comentários

Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base Informações Técnicas Página 63