Cisco MDS 9000 Manual do Utilizador descarregar pdf (Página 2)

switch(config-profile)# ip address

ip-address

Associates the profile with the local IP address of the

Gigabit Ethernet interface. Make this association for

both switches in the connection.

switch(config)# interface fcip

interface_number

Configures a specified FCIP interface from 1 to 255.

switch(config-if)# use-profile profile-id

Assigns the profile to the FCIP interface.

switch(config-if)# peer-info ipaddr

ip-address

Assigns the peer IP address information to the FCIP

interface. On switch1, assign the IP address information

for switch2; on switch 2, assign the IP address

information for switch1.

VSAN Commands

switch(config)# vsan database

switch(config-vsan-db)# vsan vsan-id

Creates the VSAN with the specified vsan-id range.

switch(config-vsan-db)# vsan vsan-id name

vsan-name

Adds a description to a VSAN, where vsan-id is the

VSAN and vsan-name is the VSAN description.

switch(config-vsan-db)# vsan vsan-id

interface type slot/port

Adds an interface to a VSAN, where vsan-id is the VSAN

number and type, slot/port is the interface.

switch(config-vsan-db)# vsan vsan-id

interface type slot/port - port

Adds a specified range of interfaces into a VSAN from

the same line card.

switch# show vsan

Lists all VSANs.

switch# show vsan membership

Lists ports within a VSAN.

Fcdomain Commands

switch(config)# fcdomain restart vsan

vsan-id

Forces the VSAN to reconfigure without data traffic

disruption.

switch(config)# fcdomain restart disruptive

vsan vsan-id

Forces the VSAN to reconfigure with data traffic

disruption.

switch (config)# fcdomain domain id

preferred vsan vsan-id

Configures the switch in the specified VSAN to request a

preferred domain ID

switch(config)# fcdomain domain id static

vsan

vsan-id

Configures the switch in the specified VSAN to take only

a specific ID and moves the local interfaces in the VSAN

to an isolated state if the domain ID is not granted.

Alias, Zone, and Zone Set Commands

switch# show flogi database

Displays the devices that have logged into the fabric.

Retrieve pWWNs for aliases and zoning from this

database.

switch# show fcns database

Displays device name server registration information per

VSAN.

switch(config)# fcalias name alias-name

vsan vsan-id

Configures an alias mapping for a device where

alias-name is the canonical name within the VSAN.

switch(config-fcalias)# member pwwn

hh:hh:hh…

Defines a mapping of pWWN hh:hh:hh… to the fcalias

name. pWWN can be retrieved from the FLOGI or FCNS

database.

switch(config)# zone name name vsan

vsan-id

Creates a named zone within the VSAN.

switch(config-zone)# member fcalias name

Adds the node referenced by the named fcalias to the

zone.

switch(config-zone)# member pwwn

hh:hh:hh….

Adds the device referenced by pWWN hh:hh:hh... to the

zone.

switch(config)# zoneset name name vsan

vsan-id

switch(config-zoneset)# member name

Creates a named zone set within the VSAN and adds a

named zone to the zone set.

switch(config)# zoneset distribute full

vsan vsan-id

Configures the switch to distribute all zone sets rather

than just the active zone set for the VSAN.

switch# show fcalias

Displays alias mappings.

switch# show zone

Displays zone mappings.

switch# show zoneset

Displays all zone sets.

switch# show zoneset active

Displays the active zone set for each VSAN, including

which devices have logged in and are communicating

Inter-VSAN Routing Commands

switch(config)# ivr enable

switch(config-ivr-topology-db)#

autonomous-fabric-id fabric-id switch-wwn

hh:hh:hh… vsan-ranges 1-32 vsan-ids

Enables IVR routing and defines which VSANs are

resident on which switches within the fabric. Can include

explicit VSAN definitions or a range of them.

switch(config)# ivr zone name name

switch(config-ivr-zone)# member pwwn

hh:hh:hh… vsan vsan-id

Creates a named IVR zone. Members must be specified

by unique identifiers (alias, pWWN, etc.) and by VSAN.

switch(config)# ivr zoneset name name

switch(config-ivr-zoneset)# member name

Creates an IVR zone set and adds member zones.

switch(config)# ivr zoneset activate name

name

Activates the IVR zone set and enables the zones in the

fabric.

switch# show ivr vsan-topology

switch# show ivr zoneset active

switch# show ivr tech-support

CFS Commands

Cisco Fabric Services (CFS) provides a common

infrastructure for automatic configuration

synchronization in the fabric. Various Cisco SAN-OS

applications use CFS. The following examples show

commands that support the NTP CFS application.

switch# config term

switch(config)# ntp distribute

Enables the distribution of the NTP configuration to the

fabric. By leveraging CFS, this action needs to occur just

once over the life of the application.

switch(config)# ntp server hostname|ip-

address

Forms an association with an NTP server.

switch(config)# ntp commit

Commits changes to the active NTP configuration.

switch(config)# ntp abort

Discards the proposed changes.

switch(config)# show ntp pending-diff

Displays the difference between the active NTP

configuration and the proposed changes that go into

effect when the ntp commit command executes.

switch# show cfs application

Displays CFS information for all applications.

switch# show cfs application name name

Displays CFS information for the named application

Troubleshooting Commands

switch# fcping fcid fcid vsan vsan-id

switch# fcping pwwn hh:hh:hh… vsan vsan-id

Sends ECHO over Fibre Channel frames to determine if

the destination device is logged in and communicating.

switch# fctrace fcid fcid vsan vsan-id

Traces the route to an N port.

switch(config)# fcanalyzer local brief

limit-captured-frames 0

Captures control frames to a console session.

switch# show tech-support details

Performs the following commands: show version, show

environment, show module, show run, show hardware,

show interface, show accounting log, show process,

show license, and show system health.

switch# tac-pac

Creates a gzip file (show_tech_out.gz) on the volatile file

system of the show tech details command. This file is

then stored in volatile memory.

switch# show version

switch# show interface brief

switch# show interface fc slot/port trunk

vsan

switch# show module

switch# show fspf internal route vsan

switch# show topology vsan vsan-id

switch# show device-alias

switch# show fcalias

switch# show fcroute

switch# show fspf internal route vsan

vsan-id

switch# show logging logfile

switch# show logging last lines

1 2

Comentários a estes Manuais

Sem comentários

Cisco MDS 9000 Manual do Utilizador Página 2

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Cisco MDS 9000