Cisco SCE 2000 4xGBE Especificações descarregar pdf (Página 73)

100

101

2-37

Cisco SCE 2000 and SCE 1000 CLI Command Reference

OL-26797-03

Chapter 2 CLI Command Reference

bandwidth

Sets Ethernet shaping for the GigabitEthernet line interfaces.

bandwidth bandwidth burst-size burstsize

Syntax Description

Command Default bandwidth = 100000K (100 Mbps)

burst-size = 5000 (5K bytes)

Command Modes GigabitEthernet Interface Configuration

Command History This table includes the following release-specific history entries:

Usage Guidelines This command is valid for a specified GigabitEthernet line interface only. It must be executed explicitly

for each interface.

Authorization: admin

Examples The following sets bandwidth and burst size for a Gigabit Ethernet line interface (0/2) of a SCE 2000

4xGBE or SCE 1000 2xGBE.

SCE>enable 10

Password:<cisco>

SCE#config

SCE(config)#interface GigabitEthernet 0/2

SCE(config if)#bandwidth 100000 burstsize 5000



SCE(config if)#

Related Commands

bandwidth Bandwidth measured in kbps.

burstsize Burst size in bytes.

Release Modification

2.5.7 This command was introduced.

Command Description

interface

gigabitethernet

Enters GigabitEthernet Interface Configuration mode to configure a

specified Gigabit Ethernet line interface.

queue Sets the queue shaping.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 603 604

Comentários a estes Manuais

Sem comentários

Cisco SCE 2000 4xGBE Especificações Página 73

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Cisco SCE 2000 4xGBE