Cisco UBR7223 - uBR 7223 Modular Expansion Base Especificações descarregar pdf (Página 30)

Installation Overview

PA-H HSSI Port Adapter Installation and Configuration

3-4

Figure 3-4 Pulling a Port Adapter Out of a Slot—Partial Port Adapter View

Step 8

If you removed a port adapter, place it in an antistatic container for safe storage or

shipment back to the factory. If you removed a blank port adapter, no special handling is

required; however, store the blank port adapter for potential future use.

Step 9 Remove the new port adapter from its antistatic container and position it at the opening

of the slot. (See Figure 3-5.)

Caution To prevent jamming the carrier between the upper and lower edges of the port adapter slot,

and to assure that the edge connector at the rear of the port adapter mates with the connector at the

rear of the port adapter slot, make certain that the leading edges of the carrier are between the upper

and lower slot edges, as shown in the cutaway in Figure 3-5.

Figure 3-5 Aligning a Port Adapter in a Port Adapter Slot

H3149

H3150

Upper edge

Lower edge

Carrier

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 71 72

Sem comentários

Cisco UBR7223 - uBR 7223 Modular Expansion Base Especificações Página 30