Cisco VPN 3000 Guia do Utilizador descarregar pdf (Página 320)

14 Administration

14-26

VPN 3000 Concentrator Series User Guide

Administration | Access Rights | Access Control List

This section of the Manager lets you configure and prioritize the systems (workstations) that are allowed

to access the VPN Concentrator Manager. For example, you might want to allow access only from one

or two PCs that are in a locked room. If no systems are listed, then anyone who knows the VPN

Concentrator IP address and the administrator username/password combination can gain access.

As soon as you add a workstation to the list, access control becomes effective for new sessions.

Therefore, the first entry on the list should be the IP address of the workstation you are now using to

configure the VPN Concentrator. Otherwise, if you log out or time out, you will not be able to access the

Manager from the workstation.

These entries govern administrator access and management by any remote means: HTTP, FTP, TFTP,

SNMP, Telnet, etc.

Figure 14-24: Administration | Access Rights | Access Control List screen

Manager Workstations

The Manager Workstations list shows the configured workstations that are allowed to access the VPN

Concentrator Manager, in priority order. Each entry shows the priority number, IP address/ mask, and

administrator group number; e.g.,

1. 10.10.1.35/255.255.255.255 Group=1. If no workstations

have been configured, the list shows

--Empty--.

Add / Modify / Delete / Move

To configure a new manager workstation, click Add. The Manager opens the Administration | Access Rights

| Access Control List | Add

screen.

To modify a configured manager workstation, select the entry from the list and click

Modify. The

Manager opens the

Administration | Access Rights | Access Control List | Modify screen.

To remove a configured manager workstation, select the entry from the list and click

Delete. The

Manager refreshes the screen and shows the remaining entries in the

Manager Workstations list.

To change the priority order for configured manager workstations, select the entry from the list and click

Move ↑ or Move ↓. The Manager refreshes the screen and shows the reordered Manager Workstations list.

1 2 ... 315 316 317 318 319 320 321 322 323 324 325 ... 501 502

Sem comentários

Cisco VPN 3000 Guia do Utilizador Página 320