Cisco Wireless Express 526 Guia do Utilizador descarregar pdf (Página 10)

WLAN SSID The network name, or service set identifier

(SSID). This is the default SSID that the access

points use when they join a controller.

RADIUS Server IP Address The IP address of the RADIUS server if one is

available and you intend to use it. If you are using

a RADIUS server, the following fields must be

completed:

• Shared secret format (ASCII or HEX)

• Shared secret

• Confirm shared secret

• RADIUS server port (default port is 1812)

• Server status (enabled or disabled)

802.11b Network Status Check the checkbox to enable or disable the

802.11b radio network. The default is Enabled.

802.11g Network Status Check the checkbox to enable or disable the

802.11g radio network. The default is enabled.

Auto-RF Check the checkbox to enable or disable

automatic radio resource management. The

default is enabled.

Table 1 Startup Wizard Information (continued)

Wizard Setting Action

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 43 44

Sem comentários

Cisco Wireless Express 526 Guia do Utilizador Página 10