Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Guia de Resolução de Problemas descarregar pdf (Página 16)

Send documentation comments to mdsfeedbac[email protected]

Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2(3)

OL-14116-04

Upgrading Your Cisco MDS SAN-OS Software Image

Note Complete Step 2 for all IVR enabled switches before moving to Step 3.

Step 3 Check the syslogs for any ISL that was isolated.

2005 Aug 31 21:52:04 switch %FCDOMAIN-2-EPORT_ISOLATED:

%$VSAN 2005%$ Isolation of interface

port-channel 52 (reason: unknown failure)

2005 Aug 31 21:52:04 switch %FCDOMAIN-2-EPORT_ISOLATED: %$VSAN 2005%$

Isolation of interface port-channel 51

(reason: domain ID assignment failure)

Step 4 Issue the following commands for the isolated switches in Step 3:

switch(config)# vsan database

switch(config-vsan-db)# vsan vsan-id suspend

switch(config-vsan-db)# no vsan vsan-id suspend

Step 5 Issue the ivr refresh command to perform an IVR refresh on all the IVR enabled switches.

Step 6 Issue the copy running-config startup-config command to save the RDI mode in the startup

configuration on all of the switches.

Step 7 Follow the normal upgrade guidelines for Release 2.1(2b). If you are adding new switches running Cisco

MDS SAN-OS Release 2.1(2b) or later, upgrade all of your existing switches to Cisco SAN-OS Release

2.1(2b) as described in this workaround. Then follow the normal upgrade guidelines for Release 3.2(3).

Note RDI mode should not be disabled for VSANs running in interop mode 2 or interop mode 3.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 37 38

Sem comentários

Cisco DS-X9530-SF1-K9 - Supervisor-1 Module - Control Processor Guia de Resolução de Problemas Página 16