Cisco ISB7105 Guia do Utilizador descarregar pdf (Página 12)

Programming Your CISCO Remote Control

The Universal Remote Control provided with your TDS TV set-top box can be programmed to operate other devices

such as your TV, DVD, Home Theater System, or VCR.

Automatic Search for TV and DVD Codes

1. Turn on the device you want to assign to the TV or DVD button.

2. Point the remote at the device.

3. While pressing and holding a selected mode button (TV or DVD), press the OK button. For example, to search

for a TV code, press and hold TV and OK at the same time.

4. Release both buttons. All the mode buttons blink twice.

5. Enter the programming code 9 2 2 using the numbers on the remote. The mode button you selected in step

3 blinks twice to indicate a successful entry.

6. Point the remote toward the device and press PLAY. Repeatedly press PLAY (i.e. don’t hold play) until the

device powers off.

7. Once powered off, press ENTER on your remote control to save the settings. The mode button ﬂashes

three times indicating a successful entry.

Automatic Search for Auxiliary Devices

1. Turn on the device you want to assign to the AUX button.

2. Point the remote at the device.

3. While pressing and holding the AUX button, press the OK button.

4. Release both the AUX and OK buttons. All the mode buttons blink twice.

5. Enter the programming code 9 2 2 using the numbers on the remote. The AUX button blinks twice to

indicate a successful entry.

6. Press the PLAY button, choose one of the following device categories. Use the numbers on the remote,

press the assigned number (1 – 4) based on the following list:

1 = VCR 2 = Receiver/Tuners

3 = Ampliﬁers 4 = Home Theater System

7. Point the remote toward the device and press PLAY. Repeatedly press PLAY (i.e. don’t hold play) until the

device powers off.

8. Once powered off, press ENTER on your remote control to save the settings. The mode button ﬂashes

three times indicating a successful entry.

Control Power of Multiple Devices at Once

1. Press and hold the STB mode button on the remote.

2. Without releasing the STB button, press and hold the OK button.

3. Release both buttons. All the mode buttons blink twice.

4. Enter the programming code 9 7 7 using the numbers on the remote control. The STB mode

button blinks twice to indicate a successful entry.

5. For the ﬁrst device, press the button of the device you wish to program (TV, DVD, or AUX). The device will blink

twice. Then press the STB button. The STB button will blink twice.

6. For the second device, press the applicable mode button (TV, DVD, or AUX). The selected mode button

blinks twice.

7. Repeat step 6 for up to two more devices (total of four devices).

8. Press the ENTER button to complete the power switch control programming. The last selected mode

button blinks 3 times to indicate a successful entry.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 68 69

Comentários a estes Manuais

Sem comentários

Cisco ISB7105 Guia do Utilizador Página 12

Comentários a estes Manuais

Manuais e produtos relacionados com Controlos remotos Cisco ISB7105