Cisco PIX 525 Especificações Página 167

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 166
11-35
Cisco Security Appliance Command Line Configuration Guide
OL-6721-01
Chapter 11 Configuring Failover
Configuring Failover
Monitored Interfaces Displays the number of interfaces monitored out of the maximum
possible.
failover replication http Displays if HTTP state replication is enabled for Stateful Failover.
Last Failover at: The date and time of the last failover in the following form:
hh:mm:ss UTC DayName Month Day yyyy
UTC (Coordinated Universal Time) is equivalent to GMT (Greenwich
Mean Time).
This host:
Other host:
For each host, the display shows the following information.
Primary or Secondary
Active
Standby
Active time: n (sec)
The amount of time the unit has been active. This time is cumulative,
so the standby unit, if it was active in the past, will also show a value.
Interface name (n.n.n.n): For each interface, the display shows the IP address currently being
used on each unit, as well as one of the following conditions:
Failed—The interface has failed.
No Link—The interface line protocol is down.
Normal—The interface is working correctly.
Link Down—The interface has been administratively shut down.
Unknown—The security appliance cannot determine the status of
the interface.
Waiting—Monitoring of the network interface on the other unit has
not yet started.
Stateful Failover Logical
Update Statistics
The following fields relate to the Stateful Failover feature. If the Link
field shows an interface name, the Stateful Failover statistics are shown.
Link
interface_nameThe interface used for the Stateful Failover link.
Unconfigured—You are not using Stateful Failover.
up—The interface is up and functioning.
down—The interface is either administratively shutdown or is
physically down.
failed—The interface has failed and is not passing stateful data.
Table 11-4 Show Failover Display Description (continued)
Field Options
Vista de página 166
1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 603 604

Comentários a estes Manuais

Sem comentários