Cisco PIX 525 Especificações descarregar pdf (Página 301)

100

101

8-21

Cisco PIX Firewall and VPN Configuration Guide

78-15033-01

Chapter 8 Managing VPN Remote Access

Using PPTP for Remote Access

The clear vpdn group command removes all the vpdn group commands from the configuration. The

clear vpdn username command removes all the vpdn username commands from the configuration. The

clear vpdn command removes all vpdn commands from the configuration.

You can troubleshoot PPTP traffic with the debug ppp and debug vpdn commands.

PPTP Configuration Example

Example 8-3 shows a simple configuration, which lets a Windows PPTP client dial in without any

authentication (not recommended). Refer to the vpdn command page in the Cisco PIX Firewall

Command Reference for more examples and descriptions of the vpdn commands and the command

syntax.

Example 8-3 PPTP Configuration Example

ip local pool my-addr-pool 10.1.1.1-10.1.1.254

vpdn group 1 accept dialin pptp

vpdn group 1 client configuration address local my-addr-pool

vpdn enable outside

static (inside, outside) 209.165.201.2 192.168.0.2 netmask 255.255.255.255

access-list acl_out permit tcp any host 209.165.201.2 eq telnet

access-group acl_out in interface outside

The ip local pool command specifies the IP addresses assigned to each VPN client as they log in to the

network. The Windows client can Telnet to host 192.168.0.2 through the global IP address 209.165.201.2

in the static command statement. The access-list command statement permits Telnet access to the host.

1 2 ... 296 297 298 299 300 301 302 303 304 305 306 ... 465 466

Comentários a estes Manuais

Sem comentários

Cisco PIX 525 Especificações Página 301

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Cisco PIX 525