Cisco 2950 - Catalyst Switch Especificações descarregar pdf (Página 191)

100

101

2-165

Catalyst 2950 and Catalyst 2955 Switch Command Reference

OL-10102-02

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands

link monitor

Use the link monitor interface configuration command to enable Long-Reach Ethernet (LRE) link

monitoring on a port. Use the no form of this command to disable LRE link monitoring on a port.

link monitor

no link monitor

This command is available only on Catalyst 2950 LRE switches.

Syntax Description This command has no arguments or keywords.

Defaults LRE monitoring is enabled.

Command Modes Interface configuration

Command History

Usage Guidelines If the link is shut down, link monitor data is not collected.

Examples This example shows how to enable LRE link monitoring on an LRE port:

Switch# configure terminal

Switch(config)# interface longreachethernet0/1

Switch(config-if)# link monitor

Related Commands

Release Modification

12.1(11)YJ This command was introduced.

Command Description

clear controllers lre link monitor Deletes LRE link monitor data.

link monitor logging Enables link monitor event logging per port.

link monitor threshold snr Sets a signal-to-noise margin for the LRE link monitor.

link monitor threshold rserr Sets a Reed-Solomon error threshold for the LRE link monitor.

show controllers lre link monitor Displays LRE link monitor information.

1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 673 674

Comentários a estes Manuais

Sem comentários

Cisco 2950 - Catalyst Switch Especificações Página 191

Comentários a estes Manuais

Manuais e produtos relacionados com Software Cisco 2950 - Catalyst Switch