Cisco Aironet 340 Series Guia de Instalação descarregar pdf (Página 24)

2-2

Cisco Aironet Access Point Hardware Installation Guide

OL-0738-02

Chapter 2 Installation

Cautions and Warnings

Translated versions of the following safety warnings are provided in Appendix A, “Translated Safety

Warnings.”

Note The FCC, with its action in ET Docket 96-8, has adopted a safety standard for human exposure to

radiated frequency (RF) electromagnetic energy emitted by FCC-certified equipment. Cisco Aironet

products meet the uncontrolled environmental limits found in OET-65 and ANSI C95.1, 1991. Proper

operation of this radio device according to the instructions in this publication will result in user exposure

substantially below the FCC recommended limits.

Caution Cisco Aironet power injectors are designed for use with 350 series access points and bridges only. Using

the power injector with other Ethernet-ready devices can damage the equipment.

Caution The operational voltage range for Cisco Aironet 350 series access points and bridges is 24 to 60 volts.

Higher voltage can damage the equipment.

Caution Cisco Aironet Power Injectors are not rated for operation in a building’s environmental air space, such

as above suspended ceilings.

Warning

Do not operate your wireless network device near unshielded blasting caps or in an explosive

environment unless the device has been modified to be especially qualified for such use.

Warning

Do not work on the system or connect or disconnect cables during periods of lightning activity.

Warning

Read the installation instructions before you connect the system to its power source.

Warning

This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that

a fuse or circuit breaker no larger than 120 VAC, 15A U.S. (240 VAC, 10A international) is used on the

phase conductors (all current-carrying conductors).

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 69 70

Sem comentários

Cisco Aironet 340 Series Guia de Instalação Página 24