Cisco MC3810 Guia de Instalação descarregar pdf (Página 61)

session target

Configuring Voice over IP for Cisco MC3810 Series Concentrators 61

session target

To conﬁgure a network-speciﬁc address for a dial peer, use the sessiontargetdial-peer conﬁguration

command. Use the no form of this command to disable this feature.

Cisco MC3810 Voice over IP:

session target {ipv4:

destination-address

| dns:[$s$. | $d$. | $e$. | $u$.]

host-name

loopback:rtp | loopback:compressed | loopback:uncompressed}

no session target

Syntax Description

For the Cisco MC3810 Voice over IP:

Defaults

Enabled with no IP address or domain name deﬁned.

Command Mode

Dial-peer conﬁguration

ipv4:destination-address IP address of the dial peer.

dns:host-name Indicates that the domain name serverwill be used to resolve the name

of the IP address. Valid entries for this parameter are characters

representing the name of the host device.

(Optional) You can use one of the following three wildcards with this

keyword when defining the session target for VoIP peers:

• $s$.—Indicates that the source destination pattern will be used as

part of the domain name.

• $d$.—Indicates that the destination number will be used as part

of the domain name.

• $e$.—Indicates that the digits in the called number will be

reversed, periods will be added in-between each digit of the called

number, and that this string will be used as part of the domain

name.

• $u$.—Indicates that the unmatched portion of the destination

pattern (such as a defined extension number) will be used as part

of the domain name.

loopback:rtp Indicates that all voice data will be looped back to the originating

source. This is applicable for VoIP peers.

loopback:compressed Indicates that all voice data will be looped back in compressed mode

to the originating source. This is applicable for POTS peers.

loopback:uncompressed Indicates that all voice data will be looped-back in uncompressed

mode to the originating source. This is applicable for POTS peers.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 77 78

Sem comentários

Cisco MC3810 Guia de Instalação Página 61