Cisco 1417 - 1417 Router - EN Manual do Utilizador descarregar pdf (Página 8)

If the WAN LNK LED does not turn on when you power up the modem:

Wait approximately fifteen seconds.1.

Check all cabling and connections.2.

Turn off the power and then turn it on again.3.

If the LED is still not on, call your service representative.4.

If the PWR/ALARM LED appears red:

Turn off the power and then turn it on again.1.

If the LED still appears red, call your service representative.2.

Note: In certain circumstances in which the Cisco 673 operates correctly, the WAN LNK light appears off

when the PWR/ALARM light is on. For example, this condition occurs when there is no data traffic across the

WAN LNK for a period of time. During subsequent requests for data, the WAN LNK light starts to blink.

This indicates that the SDSL connection sequence has begun.

Cisco 675 and 675e

The ADSL port on the Cisco 675/675e uses an RJ−11 connector.

ADSL Port Pinouts

Signal

Ring

Tip

Note: Pins 1, 2, 5, and 6 are not used.

If the WAN LNK light does not turn on when you power up the modem:

Wait approximately fifteen seconds.1.

If the light does not turn on, check all cabling and connections.2.

If the light still does not turn on, turn off the power and then turn it on again.3.

If the LED is not on, call your service representative.4.

If the PWR/ALARM light appears red:

Turn off the power and then turn it on again.1.

If the LED still appears red, call your service representative.2.

Note: In certain circumstances in which the Cisco 675/675e operates correctly, the WAN LNK light appears

off when the PWR/ALARM light is on. For example, this condition occurs when there is no data traffic across

the WAN LNK for a period of time. During subsequent requests for data, the WAN LNK light starts to blink.

This indicates that the ADSL connection sequence has begun.

LED Descriptions for the Cisco 675 and 675e

LED

Function Description

Cisco − DSL Modem/Router Interface Pinouts and Status LED Descriptions

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Sem comentários

Cisco 1417 - 1417 Router - EN Manual do Utilizador Página 8