Cisco 1710 Guia de Instalação descarregar pdf (Página 4)

Cisco Router and Security Device Manager Quick Start Guide

78-16254-06

Task 2: Configure Your PC, and Connect It to the Router

These Routers Are Not Configured as DHCP Servers

If you did not find your router in Table 1, your router is not configured as a DHCP server, and you must

assign a static IP address to the PC. Click Use the following IP address, and assign an IP address

between 10.10.10.2 and 10.10.10.6 to the Ethernet port of the PC, and use the subnet mask

255.255.255.248, as shown in Figure 2. You can leave the Default gateway and DNS server fields blank.

Find your router model in Table 2 and connect the Ethernet port on the PC to the router port shown in

the table.

Figure 2 Conﬁguring Your PC with a Static IP Address Between 10.10.10.2 and 10.10.10.6

Table 2 lists the routers that are not configured as DHCP servers.

Table 2 Routers Not Conﬁgured as DHCP Servers

Router Model Cable Type Connect the Ethernet Cable to the Port Shown

Cisco 1721

Cisco 1751

Cisco 1760

Crossover, or

straight-through

with Ethernet switch

Connect to 10/100 Ethernet.

Cisco 1841 Crossover, or

straight-through

with Ethernet switch

AUX

CONSOLE

LINK

127270

10/100 ETHERNET10/100 ETHERNET

127272

FE 0/0 AUX

FE 0/1 CONSOLE

FDX

100

LINK

FDX

100

LINK

1 2 3 4 5 6 7 8 9 ... 19 20

Sem comentários

Cisco 1710 Guia de Instalação Página 4