Cisco Catalyst 4224 Especificações descarregar pdf (Página 170)

Chapter 6 Configuring VoIP

Configure Voice Ports

6-24

Catalyst 4224 Access Gateway Switch Software Configuration Guide

OL-2031-02

Verifying Your Configuration

You can check the validity of your voice port configuration by performing the

following tasks:

• Pick up the handset of an attached telephony device and listen for a dial tone.

• Check for dual tone multifrequency (DTMF) detection. If the dial tone stops

when you dial a digit, the voice port is configured properly.

• Use the show voice-port command to verify that the configured data is

correct.

Step 7

(For FXO ports only) Specify the

maximum number of rings before

answering a call.

Required

ring number number

Step 8

Specify the private line auto ringdown

(PLAR) connection if this voice port is

used for a PLAR connection. The string

value specifies the destination telephone

number.

Optional

connection plar string

Step 9

Specify the threshold (in dB) for on-hold

music. Valid entries are from –70 to –30 db.

Optional

music-threshold number

Step 10

Attach descriptive text about this voice port

connection.

Optional

description string

Step 11

If voice activity detection (VAD) is

activated, specify that background noise is

generated.

Optional

comfort-noise

Table 6-3 Commands to Configure FXS and FXO Voice Ports (continued)

Task

Required or

Optional Command

1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 309 310

Comentários a estes Manuais

Sem comentários

Cisco Catalyst 4224 Especificações Página 170

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Cisco Catalyst 4224