Cisco uBR7100E Series Guia de Instalação descarregar pdf (Página 64)

3-10

Cisco uBR7100 Series and Cisco uBR7100E Series Universal Broadband Router Hardware Installation Guide

OL-5916-01

Chapter 3 Installing Cisco uBR7100 Series Universal Broadband Routers

Connecting the Console Port and Auxiliary Port

The router arrives with a console and auxiliary cable kit, which contains the cable and adapters you need

to connect a console (an ASCII terminal or PC running terminal emulation software) or modem to the

router. The console and auxiliary cable kit includes:

• RJ-45-to-RJ-45 rollover cable

• RJ-45-to-DB-9 female DTE adapter (labeled TERMINAL)

• RJ-45-to-DB-25 male DCE adapter (labeled MODEM)

Note For more information, see the “Console and Auxiliary Port Cables and Pinouts” section on page C-2.

Connecting to the Console Port

Use the console terminal for local administrative access to the router. You can connect a terminal to the

console port only.

To connect the console port to a terminal (an ASCII terminal or a PC running terminal emulation

software), use the following procedure:

Step 1 Connect one end of the RJ-45 rollover cable to the RJ-45-to-DB-9 adapter (labeled TERMINAL).

Step 2 Connect the other end of the rollover cable directly to the console port on the router. (See Figure 3-11.)

Figure 3-11 Connecting the Console Terminal

DS0

uBR7114

US0

DS0

US1

US2

US3

35827

Cisco uBR7100 series router

Console port

(RJ-45)

RJ-45-to-RJ-45

rollover cable

PC (laptop)

RJ-45-to-DB-9 adapter

(labeled TERMINAL)

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 137 138

Sem comentários

Cisco uBR7100E Series Guia de Instalação Página 64