Cisco UCS-SPR-C220-V1 Especificações descarregar pdf (Página 130)

C-22

Cisco UCS C220 Server Installation and Service Guide

OL-25760-01

Appendix C RAID Controller Considerations

RAID Controller Cabling

LFF 4-Drive Backplane Cabling

The cable connections required for each type of controller are as follows:

Embedded RAID

This option can control up to four drives.

The required UCSC-CABLE3 cable kit has two mini-SAS cables. Cable 1 controls drives 1–4.

Step 1 Connect mini-SAS cable 1 from the motherboard connector SAS1 to the drives 1–4 connectors on the

backplane.

Step 2 Connect the cable 1 SGPIO connector labeled, “S1” to backplane connector S1.

Mezzanine-Style Card

This option can control up to four drives.

The required UCSC-CABLE3 cable kit has two mini-SAS cables. Cable 1 controls drives 1–4.

Step 1 Connect mini-SAS cable 1 from connector SAS1 on the card to the drives 1–4 connectors on the

backplane.

Step 2 Connect the mini-SAS cable 1 SGPIO connector S1 to backplane connector S1.

PCIe-Style Card

This option can control up to four drives.

The required UCSC-CABLE3 cable kit has two mini-SAS cables. Cable 1 controls drives 1–4.

Step 1 Connect mini-SAS cable 1 from connector SAS1 on the card to the drives 1–4 connectors on the

backplane.

Step 2 Connect the mini-SAS cable 1 SGPIO connector S1 to backplane connector S1.

1 2 ... 125 126 127 128 129 130 131 132 133 134

Sem comentários

Cisco UCS-SPR-C220-V1 Especificações Página 130