Cisco 820 Series Guia de Instalação descarregar pdf (Página 3)

1-3

Cisco 820 Series and SOHO Series Router Cabling and Setup

78-13937-04

Chapter 1 Cisco 820 Series and SOHO Series Routers Cabling and Setup

Streamline Installation: Try These Steps First!

To Receive a Return Materials Authorization (RMA) Number

Contact the company from whom you purchased the product. If you purchased the product directly from

Cisco, contact your Cisco Sales and Service Representative.

Complete the information below, and keep it for reference.

Streamline Installation: Try These Steps First!

This router is configured for the most common type of installation. To set up the router quickly, try

performing the following steps. If you cannot complete a step, or if you want more information at any

point, skip to the “Connect the Router to a PC” section on page 1-4, and complete the steps described in

the other sections of this Quick Start Guide.

Step 1 Cable the router. Connect your PCs to the router, and connect the router to a DSL line.

Step 2 Connect the power. Connect the AC adapter to the router, and plug the AC adapter into a wall socket.

Step 3 Start, or restart, a PC that is connected to the router.

Step 4 Start a web browser on the PC (Netscape version 3.0 to 4.7, or Internet Explorer version 4.0 or later,)

and enter the URL http://10.10.10.1. The home page of the router should appear after 1 or 2 minutes.

Step 5 If you have no special configuration requirements, click the Router Setup link on the home page, and

then click Quick Setup. (This may appear as Easy Setup on some models.)

Step 6 Enter the user name and password provided to you by your Internet service provider. Check the Test

Connection box, and click Apply. (If no Test Connection box is present, click the Test Connection link

after clicking Apply.)

Step 7 Click the Router Password link on the home page and set a password for the router.

Step 8 Select Start/Run, and type winipcfg in the Open field of the Run window. When the IP Config window

appears, click Release. Then click Renew to release and renew the PC’s IP address. Alternatively, enter

ipconfig /release to release the PC’s IP address, and then enter ipconfig /renew to renew the IP address

of the PC.

Step 9 Open a web browser on the PC, and connect to a website. If you connected to a website, you have

successfully completed the installation.

Step 10 If you could not connect to a website, see the “Connect the Router to a PC” section on page 1-4, and

complete the steps described in the other sections of this Quick Start Guide.

Company product purchased from

Company telephone number

Product model number

Product serial number

Maintenance contract number

1 2 3 4 5 6 7 8 ... 15 16

Sem comentários

Cisco 820 Series Guia de Instalação Página 3