Cisco 820 Series Guia de Instalação descarregar pdf (Página 9)

1-9

Cisco 820 Series and SOHO Series Router Cabling and Setup

78-13937-04

Chapter 1 Cisco 820 Series and SOHO Series Routers Cabling and Setup

Check the PC Configuration

Figure 1-5 Connecting the Power to the Router

Check the PC Configuration

Each PC that is connected to the router must be configured to use the Transmission Control

Protocol/Internet Protocol (TCP/IP) and to obtain its IP address automatically. Follow these steps to

configure each PC that is running Microsoft Windows NT or Microsoft Windows 95 or 98. If the PC is

running a different version of Microsoft Windows, refer to the documentation that came with the PC.

Step 1 Start the PC, and open the Control Panel.

Step 2 Click the Network icon to display the Network window.

Step 3 Verify that TCP/IP has been added and associated with the Ethernet adapter. TCP/IP is shown as a cable

icon in the Configuration window on Microsoft Windows 95 and 98; and as a cable icon in the Protocol

window on Microsoft Windows NT. If the icon is not visible, click Add, and add Microsoft TCP/IP.

Step 4 To verify that the PC is configured to obtain an IP address automatically, click the TCP/IP cable icon,

and select the IP address tab in the TCP/IP Properties window. If it is unchecked, check Obtain an IP

address from a DHCP server. The IP address and Subnet mask fields should be grayed out.

Step 5 To accept all changes and exit this window, click OK. Then click OK in the Network window.

Step 6 If you are prompted, click Yes to reboot the PC.

For more information on how to configure TCP/IP, refer to the Cisco Router Web Setup Troubleshooting

Guide, which is available on Cisco.com.

ETHERNET

TO HUB

TO PC

+5,+12,-12,-24,-71 VDC

CONSOLE

Model Cisco 827-4V

ADSL

PHONE

4. Connect power

cord to electrical

outlet.

3. Connect power cord

to power supply.

2. Connect power

supply cable.

5. Press power

switch to on ( ).

1. Press power switch to standby ( ).

Cisco 827-4V router

Desktop power

supply

65594

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comentários a estes Manuais

Sem comentários

Cisco 820 Series Guia de Instalação Página 9

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Cisco 820 Series