Cisco CX-FEIP-2TX= Installation and con?guration Especificações descarregar pdf (Página 414)

100

101

11-4

Cisco ONS 15454 Installation and Operations Guide, R3.2

March 2002

Chapter 11 SNMP

SNMP Support

Figure 11-4 Setting up SNMP

Step 4

Type the IP address of your NMS in the IP Address field.

Step 5 Type the SNMP community name in the Community Name field.

For a description of SNMP community names, see the “SNMP Community Names” section on

page 11-9.

Note The community name is a form of authentication and access control. The community name

assigned to the ONS 15454 is case-sensitive and must match the community name of the

NMS.

Note The default UDP port for SNMP is 162.

Step 6 Set the Trap Version field for either SNMPv1 or SNMPv2.

Refer to your NMS documentation to determine whether to use SNMP v1 or v2.

Step 7 Set your maximum traps per second in the Max Traps per Second field.

Note The Max Traps per Second is the maximum number of traps per second that will be sent to

the SNMP manager. If the field is set to 0, there is no maximum and all traps are sent.

Step 8 Click OK.

SNMP settings are now configured. To view SNMP information for each node, highlight the node IP

address in the Trap Destinations area of the Trap Destinations screen (Figure 11-5).

1 2 ... 409 410 411 412 413 414 415 416 417 418 419 ... 492 493

Comentários a estes Manuais

Sem comentários

Cisco CX-FEIP-2TX= Installation and con?guration Especificações Página 414

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Cisco CX-FEIP-2TX= Installation and con?guration