Cisco 11.0 BT Especificações descarregar pdf

Doc. No.

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

Cisco Systems, Inc.

Corporate Headquarters

Second-Generation Channel Interface

Processor (CIP2) Installation and Conﬁguration

Product Numbers: CX-CIP2-ECA1(=), CX-CIP2-ECA2(=), CX-CIP2-ECAP1(=),

CX-CIP2-PCA1(=), CX-CIP2-PCA2(=), CX-CIP2-U-ECA1(=), CX-CIP2-U-ECA2(=),

CX-CIP2-U-ECAP1(=), CX-CIP2-U-PCA1(=), CX-CIP2-U-PCA2(=), CAB-PCA-Y=,

CAB-PCA-VA=, CAB-PCA-VB=

This document contains instructions for installing (or replacing) the second-generation Channel

Interface Processor (CIP2) in the Cisco 7000 series routers and the Cisco 7500 series routers.

Important Note The following Cisco IOS releases support the CIP2: Cisco IOS Release 10.2(13),

or later, Release 10.3(13), or later, Release 11.0(10), or later, or Release 11.1(5) or later. Prior to

these Cisco IOS releases being available, CIP2 is supported with a special microcode image.

This microcode image is available through download from Cisco Connection Online (CCO), on

diskettes shipped with the CIP2 when shipped separately from a system (as a spare), or is already in

Flash memory on a preconﬁgured system. (For instructions on placing CIP2 microcode in Flash

memory, see the section “CIP2 Microcode Guidelines” on page 42.)

We recommend that you load and use the version of CIP2 microcode that is bundled with your Cisco

IOS software. If you choose not to, you must then copy a CIP2 microcode image into Flash memory

and use a speciﬁed conﬁguration command to instruct the Cisco IOS to use this microcode image

instead of the microcode image bundled with your version of the Cisco IOS; however, this is

unnecessary if you load the bundled, recommended CIP2 microcode version.

(For general information on CIP2 microcode, refer to the section “CIP2 Microcode Overview” on

page 6. For speciﬁc instructions on conﬁguring the Cisco IOS to use a CIP2 microcode image from

Flash memory, refer to the section “CIP2 Microcode Upgrade Overview” on page 43.)

78-3335-03

1 2 3 4 5 6 ... 51 52

Resumo do Conteúdo

Página 1 - CAB-PCA-VA=, CAB-PCA-VB=

Página 2 - If You Need More Information

10 Second-Generation Channel Interface Processor (CIP2) Installation and ConﬁgurationCIP2 Installation PrerequisitesIf the installed ECA is the earlie

Página 3

Second-Generation Channel Interface Processor (CIP2) Installation and Configuration 11CIP2 Installation PrerequisitesWaarschuwing Dit waarschuwingssy

Página 4

12 Second-Generation Channel Interface Processor (CIP2) Installation and ConﬁgurationCIP2 Installation PrerequisitesVarning! Denna varningssymbol sign

Página 5

Second-Generation Channel Interface Processor (CIP2) Installation and Configuration 13CIP2 Installation Prerequisites• When you remove a processor mo

Página 6 - CIP2 Microcode Overview

14 Second-Generation Channel Interface Processor (CIP2) Installation and ConﬁgurationCIP2 Installation PrerequisitesTools and Parts RequiredYou need t

Página 7

Second-Generation Channel Interface Processor (CIP2) Installation and Configuration 15CIP2 Installation PrerequisitesFigure 3 Cisco 7000 with RSP7000

Página 8 - (or greater)

16 Second-Generation Channel Interface Processor (CIP2) Installation and ConﬁgurationCIP2 Installation PrerequisitesFigure 4 shows the interface proce

Página 9

Second-Generation Channel Interface Processor (CIP2) Installation and Configuration 17CIP2 Installation PrerequisitesIn the Cisco 7010, slot 3 is res

Página 10 - Safety Guidelines

18 Second-Generation Channel Interface Processor (CIP2) Installation and ConﬁgurationCIP2 Installation PrerequisitesWhat Is the Cisco 7500 Series?This

Página 11

Second-Generation Channel Interface Processor (CIP2) Installation and Configuration 19CIP2 Installation PrerequisitesFigure 8 shows the rear of the C

Página 12

2 Second-Generation Channel Interface Processor (CIP2) Installation and ConﬁgurationDocument ContentsNote For additional speciﬁc CIP2 software and har

Página 13

20 Second-Generation Channel Interface Processor (CIP2) Installation and ConﬁgurationCIP2 Installation PrerequisitesFigure 9 shows the rear of the Cis

Página 14 - Tools and Parts Required

Second-Generation Channel Interface Processor (CIP2) Installation and Configuration 21What Is the CIP2What Is the CIP2This section discusses channel

Página 15 - ROUTE SWITCH PROCESSOR

22 Second-Generation Channel Interface Processor (CIP2) Installation and ConﬁgurationWhat Is the CIP2Caution To prevent system problems in Cisco 7000

Página 16 - AC POWER

Second-Generation Channel Interface Processor (CIP2) Installation and Configuration 23What Is the CIP2CIP2 Model NumbersThere are three CIP2 carrier

Página 17

24 Second-Generation Channel Interface Processor (CIP2) Installation and ConﬁgurationWhat Is the CIP2CIP2 DRAM ConﬁgurationsEach CIP2 model is availab

Página 18

Second-Generation Channel Interface Processor (CIP2) Installation and Configuration 25What Is the CIP2Following are the sequences for the CIP2 LED in

Página 19 - ROUTE SWITCH PROCESSOR 2

26 Second-Generation Channel Interface Processor (CIP2) Installation and ConﬁgurationWhat Is the CIP2ESCON and Bus and Tag SpeciﬁcationsTable 3 lists

Página 20

Second-Generation Channel Interface Processor (CIP2) Installation and Configuration 27What Is the CIP2Bus and Tag CablesFollowing are descriptions an

Página 21

28 Second-Generation Channel Interface Processor (CIP2) Installation and ConﬁgurationWhat Is the CIP2Note the switch marked S (for select mode) and B

Página 22 - CIP2 Description

Second-Generation Channel Interface Processor (CIP2) Installation and Configuration 29What Is the CIP2The IBM part number is 12G8058; however, this i

Página 23 - What Is the CIP2

Second-Generation Channel Interface Processor (CIP2) Installation and Configuration 3If You Need More Information• Refer to the following modular con

Página 24 - Figure 12 CIP2 LED Indicators

30 Second-Generation Channel Interface Processor (CIP2) Installation and ConﬁgurationCIP2 Hardware InstallationCaution To prevent damaging the PCA con

Página 25

Second-Generation Channel Interface Processor (CIP2) Installation and Configuration 31CIP2 Hardware InstallationRemoving a CIP2 or an Interface Proce

Página 26

32 Second-Generation Channel Interface Processor (CIP2) Installation and ConﬁgurationCIP2 Hardware InstallationFigure 18 shows the functions of the ej

Página 27

Second-Generation Channel Interface Processor (CIP2) Installation and Configuration 33CIP2 Hardware InstallationThe function of the ejector levers (s

Página 28

34 Second-Generation Channel Interface Processor (CIP2) Installation and ConﬁgurationCIP2 Hardware InstallationStep 8 Place the removed CIP2 on an ant

Página 29

Second-Generation Channel Interface Processor (CIP2) Installation and Configuration 35CIP2 Hardware InstallationStep 6 Using the thumb and foreﬁnger

Página 30 - • Installing a CIP2, page 34

36 Second-Generation Channel Interface Processor (CIP2) Installation and ConﬁgurationCIP2 Hardware InstallationStep 2 Attach the PCA connector of the

Página 31 - CIP2 Hardware Installation

Second-Generation Channel Interface Processor (CIP2) Installation and Configuration 37CIP2 Hardware InstallationStep 4 If required, extend the length

Página 32

38 Second-Generation Channel Interface Processor (CIP2) Installation and ConﬁgurationCIP2 Hardware InstallationStep 11 It is also possible to connect

Página 33

Second-Generation Channel Interface Processor (CIP2) Installation and Configuration 39CIP2 Hardware InstallationStep 3 Remove the PCA cable connector

Página 34 - Installing a CIP2

4 Second-Generation Channel Interface Processor (CIP2) Installation and ConﬁgurationCIP2 Installation PrerequisitesCIP2 Installation PrerequisitesBefo

Página 35

40 Second-Generation Channel Interface Processor (CIP2) Installation and ConﬁgurationChecking the CIP2 InstallationChecking the CIP2 InstallationAfter

Página 36

Second-Generation Channel Interface Processor (CIP2) Installation and Configuration 41Checking the CIP2 InstallationStep 3 When the reinitialization

Página 37

42 Second-Generation Channel Interface Processor (CIP2) Installation and ConﬁgurationCIP2 Microcode GuidelinesIf an error message is displayed on the

Página 38

Second-Generation Channel Interface Processor (CIP2) Installation and Configuration 43CIP2 Microcode GuidelinesCIP2 Microcode Upgrade OverviewFollowi

Página 39 - To an ESCON Director (switch)

44 Second-Generation Channel Interface Processor (CIP2) Installation and ConﬁgurationCIP2 Microcode GuidelinesUpgrading from a Flash Memory CardFor CI

Página 40

Second-Generation Channel Interface Processor (CIP2) Installation and Configuration 45CIP2 Microcode GuidelinesIf you plan to load a microcode image

Página 41

46 Second-Generation Channel Interface Processor (CIP2) Installation and ConﬁgurationCIP2 Microcode GuidelinesStep 4 To save the conﬁguration ﬁle, pre

Página 42 - CIP2 Microcode Guidelines

Second-Generation Channel Interface Processor (CIP2) Installation and Configuration 47CIP2 Microcode GuidelinesCopying to Flash Memory on an RSP or R

Página 43

48 Second-Generation Channel Interface Processor (CIP2) Installation and ConﬁgurationCIP2 Microcode GuidelinesAdditional Flash Memory CommandsFollowin

Página 44 - Conﬁguring Microcode

Second-Generation Channel Interface Processor (CIP2) Installation and Configuration 49Running CIP2 Diagnostic TestsIn the preceding command display o

Página 45

Second-Generation Channel Interface Processor (CIP2) Installation and Configuration 5CIP2 Installation PrerequisitesTable 1 lists the speciﬁc Cisco I

Página 46 - Using Flash Memory

50 Second-Generation Channel Interface Processor (CIP2) Installation and ConﬁgurationRunning CIP2 Diagnostic TestsThe interface has to pass the ﬁrst ﬁ

Página 47

Second-Generation Channel Interface Processor (CIP2) Installation and Configuration 51Cisco Connection OnlineCisco Connection OnlineCisco Connection

Página 48

52 Second-Generation Channel Interface Processor (CIP2) Installation and ConﬁgurationCisco Connection Online

Página 49 - Running CIP2 Diagnostic Tests

6 Second-Generation Channel Interface Processor (CIP2) Installation and ConﬁgurationCIP2 Installation PrerequisitesThe show version and show hardware

Página 50 - • Until a failure occurs

Second-Generation Channel Interface Processor (CIP2) Installation and Configuration 7CIP2 Installation PrerequisitesFollowing is a partial-display ex

Página 51 - • Telnet: cco.cisco.com

8 Second-Generation Channel Interface Processor (CIP2) Installation and ConﬁgurationCIP2 Installation PrerequisitesVerifying ECA Models by Examining E

Página 52 - Cisco Connection Online

Second-Generation Channel Interface Processor (CIP2) Installation and Configuration 9CIP2 Installation PrerequisitesFigure 2 Earlier ECA Installed on