Cisco RSP7000 Especificações descarregar pdf (Página 46)

46 7000 Series Route Switch Processor (RSP7000) Installation and Conﬁguration in the Cisco 7000 Series Routers

Reference Information

Step 5 Use the following series of commands to designate the ﬁle image.new (which is in the Flash

memory card in slot 0) as the default boot image:

Router# config t

Router(config)# no boot system

Router(config)# boot system flash slot0:image.new

Router(config)# ^z

Router# copy running-config startup-config

Router# reload

When the system reloads, it will boot the ﬁle image.new from the Flash memory card in slot 0.

Recovering from Locked Blocks

A locked block of Flash memory occurs when power is lost or a Flash memory card is unplugged

during a write or erase operation. When a block of Flash memory is locked, it cannot be written to

or erased, and the operation will consistently fail at a particular block location. The only way to

recover from locked blocks is by reformatting the Flash memory card with the format command.

Caution Formatting a Flash memory card will cause existing data to be lost.

1 2 ... 41 42 43 44 45 46 47 48

Sem comentários

Cisco RSP7000 Especificações Página 46