Cisco Cisco Access Registrar 4.2 Especificações descarregar pdf (Página 288)

100

101

6-24

Cisco Wireless LAN Controller Configuration Guide

OL-13826-01

Chapter 6 Configuring WLANsWireless Device Access

Configuring WLANs

Step 5 In the Session Timeout field, enter a value between 300 and 86400 seconds to specify the duration of the

client session. The default value is 1800 seconds for the following Layer 2 security types: 802.1X; Static

WEP+802.1X; and WPA+WPA2 with 802.1X, CCKM, or 802.1X+CCKM authentication key

management and 0 seconds for all other Layer 2 security types. A value of 0 is equivalent to no timeout.

Step 6 Click Apply to commit your changes.

Step 7 Click Save Configuration to save your changes.

Using the CLI to Configure a Session Timeout

Using the controller CLI, follow these steps to configure a session timeout for wireless clients on a

WLAN.

Step 1 To configure a session timeout for wireless clients on a WLAN, enter this command:

config wlan session-timeout wlan_id timeout

The default value is 1800 seconds for the following Layer 2 security types: 802.1X; Static WEP+802.1X;

and WPA+WPA2 with 802.1X, CCKM, or 802.1X+CCKM authentication key management and 0

seconds for all other Layer 2 security types. A value of 0 is equivalent to no timeout.

Step 2 To save your changes, enter this command:

save config

Step 3 To see the current session timeout value for a WLAN, enter this command:

show wlan wlan_id

Information similar to the following appears:

WLAN Identifier.................................. 9

Profile Name..................................... test12

Network Name (SSID)........................... test12

...

Number of Active Clients......................... 0

Exclusionlist Timeout............................ 60 seconds

Session Timeout............................... 1800 seconds

...

Configuring Layer 3 Security

This section explains how to configure Layer 3 security settings for a WLAN on the controller.

Note Layer 2 Tunnel Protocol (L2TP) and IPSec are not supported on controllers running software release 4.0

or later.

1 2 ... 283 284 285 286 287 288 289 290 291 292 293 ... 635 636

Comentários a estes Manuais

Sem comentários

Cisco Cisco Access Registrar 4.2 Especificações Página 288

Comentários a estes Manuais