
Cisco IOSSoftware Configurationforthe Cisco12000Series One-PortChannelized OC-12/STM-4(DS1/E1)ISE Line
Layer 2 Software Feature Descriptions
5
Cisco IOS Release 12.0(27)S1
http://www.cisco.com/univercd/cc/td/doc/product/core/cis12000/linecard/lc_chan/13921c12.htm
Layer 2 Software Feature Descriptions
The following subsections provide an overview of the wide area network protocols supported on the
1-Port CHOC-12 ISE line card:
• Cisco High-level Data Link Control Protocol, page 5
• Frame Relay Protocol, page 5
• Multilink Point to Point Protocol, page 5
• Multilink Frame Relay, page 6
Cisco High-level Data Link Control Protocol
The 1-Port CHOC-12 ISE line card supports standard Cisco HDLC encapsulation.
Frame Relay Protocol
The 1-Port CHOC-12 ISE line card supports the following frame relay features:
• ELMI address registration
• Cisco, ANSI and ITU LMI with autosensing
• 2-byte header
• Maximum of 1,024 data link connection identifiers (DLCIs) per interface, channel group or
multilink bundle, with a total limit of 5,120 user defined DLCIs per line card.
Note The current Cisco IOS limitations are 2,048 IDBs per line card. Because each interface requires
at least one hardware IDB and one software IDB, the limit of 1,024 DLCIs applies to each card.
• Link Fragmentation Reassembly (LFI) as specified by the Frame Relay Fragmentation
Implementation Agreement (FRF.12). The available fragmentation sizes are 128, 256, and 512
bytes.
Note Forward explicit congestion notification (FECN) and backward explicit congestion notification
(BECN) signaling are not supported at this release.
Multilink Point to Point Protocol
Compliant with the PPP Multilink Protocol (MP) RFC 1990, The 1-Port CHOC-12 ISE line card
supports the following Multilink Point to Point Protocol(MLPPP) features:
• Up to 8 DS1s per multilink bundle
• Bundle members are limited to a single line card
• Links in the bundle must have equal DS1 bandwidth
• Up to 168 MLPP bundles.
Comentários a estes Manuais