Cisco IE 2000 Especificações Página 125
- Página / 336
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
8-5
System Management Software Configuration Guide for Cisco IE 2000U and Connected Grid Switches
Chapter 8 Configuring LLDP and LLDP-MED
Configuring LLDP and LLDP-MED
EXAMPLE
This example shows how to configure LLDP characteristics:
Switch# configure terminal
Switch(config)# lldp holdtime 120
Switch(config)# lldp reinit 2
Switch(config)# lldp timer 30
Switch(config)# end
Disabling and Enabling LLDP Globally
LLDP is disabled globally by default and is enabled on NNIs. It is disabled by default on ENIs, but can
be enabled per interface. LLDP is not supported on UNIs.
Disabling LLDP
BEFORE YOU BEGIN
Review the “Information About LLDP and LLDP-MED” section on page 8-1.
DETAILED STEPS
EXAMPLE
This example shows how to globally disable LLDP:
Switch# configure terminal
Switch(config)# no lldp run
Switch(config)# end
Enabling LLDP
BEFORE YOU BEGIN
Review the “Information About LLDP and LLDP-MED” section on page 8-1.
DETAILED STEPS
Command Purpose
Step 1
configure terminal Enter global configuration mode.
Step 2
no lldp run Disable LLDP.
Step 3
end Return to privileged EXEC mode.
Command Purpose
Step 1
configure terminal Enter global configuration mode.
- System Management Software 1
- CONTENTS 3
- 10 Configuring CDP 10-1 8
- 12 Configuring RMON 12-1 10
- 14 Configuring SNMP 14-1 11
- Contents 12
- A Supported MIBs A-1 14
- Overview 15
- Chapter 1 Overview 16
- Features 16
- Switch Boot Optimization 17
- MAC Address Table 17
- Switch Alarms 18
- SDM Templates 18
- Smartports Macros 18
- LLDP and LLDP-MED 19
- Port-Based Traffic Control 19
- SPAN and RSPAN 20
- System Message Logging 20
- Cisco IOS IP SLAs 21
- Embedded Event Manager 21
- Ethernet OAM, CFM, and E-LMI 22
- Online Diagnostics 22
- Supported MIBs 22
- Boot Process 24
- DHCP-Based Autoconfiguration 25
- DHCP Image Upgrade 26
- TFTP Server 27
- DNS Server 27
- Relay Device 28
- Obtaining Configuration Files 28
- Example Configuration 29
- Assigning Switch Information 33
- Configuring the Client 36
- Booting Manually 40
- First Reload 49
- Administering the Switch 53
- System Clock 54
- Network Time Protocol 54
- Configuring NTP 59
- Configuring NTP Associations 60
- Setting the System Clock 67
- Configuring DNS 72
- Creating a Banner 73
- Configuring a Login Banner 75
- MOTD Banner 88
- Configuring the Switch Alarms 91
- Port Status Monitoring Alarms 92
- Triggering Alarm Options 93
- Configuring External Alarms 94
- Configuring Switch Alarms 97
- Configuring Alarm Profiles 99
- BEFORE YOU BEGIN 100
- DETAILED STEPS 100
- Verifying Configuration 102
- Configuration Example 102
- Related Documents 104
- Feature History 104
- Configuring SDM Templates 105
- • Indirect IPv4 routes – 4 K 106
- Prerequisites 107
- Guidelines and Limitations 108
- Default Settings 108
- Configuring Smartports Macros 113
- Creating Smartports Macros 116
- Applying Smartports Macros 117
- Configuring LLDP and LLDP-MED 121
- LLDP-MED 122
- Disabling LLDP 125
- Enabling LLDP 125
- Configuring LLDP-MED TLVs 127
- Disabling a TLV 128
- Enabling a TLV 128
- Storm Control 134
- Protected Ports 135
- Port Blocking 135
- Port Security 135
- Secure MAC Addresses 136
- Security Violations 136
- Configuring Storm Control 140
- Configuring Protected Ports 142
- Configuring Port Blocking 143
- Configuring Port Security 144
- Configuring CDP 155
- Disabling and Enabling CDP 157
- Enabling CDP 158
- Disabling CDP on an Interface 158
- Enabling CDP on an Interface 159
- Configuring SPAN and RSPAN 163
- Local SPAN 164
- Remote SPAN 164
- SPAN Sessions 165
- Monitored Traffic 166
- Source Ports 167
- Source VLANs 168
- VLAN Filtering 168
- Destination Port 168
- RSPAN VLAN 169
- OL-29255-03 174
- Specifying VLANs to Filter 178
- Configuring RSPAN 179
- Configuring RMON 191
- System Log Message Format 200
- Disabling Message Logging 202
- Synchronizing Log Messages 204
- Verifying the Configuration 214
- Configuring SNMP 217
- SNMP Versions 218
- SNMP Manager Functions 219
- SNMP Agent Functions 220
- SNMP Community Strings 220
- SNMP Notifications 221
- Table 14-3 ifIndex Values 222
- Configuring Community Strings 225
- Event Detectors 244
- CFM Domain 260
- CFM Messages 263
- SNMP Traps and Fault Alarms 263
- Configuration Error List 263
- CFM Version Interoperability 264
- IP SLAs Support for CFM 264
- Configuring Ethernet CFM 265
- Configuring the CFM Domain 266
- Configuring Static Remote MEP 271
- Configuring a Port MEP 273
- Configuring SNMP Traps 275
- Configuring Fault Alarms 275
- Y.1731 Terminology 282
- Alarm Indication Signals 283
- Ethernet Locked Signal 284
- Multicast Ethernet Loopback 284
- Default Y.1731 Configuration 285
- Configuring ETH-AIS 285
- Configuring ETH-LCK 287
- Hold-time: 100 Minutes 292
- Configuring Ethernet OAM 293
- Enabling Ethernet Loopback 305
- Information About E-LMI 309
- Configuring E-LMI 310
- Configuring the OAM Manager 311
- Enabling E-LMI 314
- Enabling Ethernet OAM 319
- Scheduling Online Diagnostics 325
- Chapter A Supported MIBs 334
- MIB List 334
Manuais e produtos relacionados com Software Cisco IE 2000
Software Cisco LRE CPE Especificações
(648 páginas)
(648 páginas)
Software Cisco Cisco Access Registrar 4.2 Especificações
(636 páginas)
(636 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.067 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais