Cisco IE 2000 Especificações Página 285
- Página / 336
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
17-27
System Management Software Configuration Guide for Cisco IE 2000U and Connected Grid Switches
Chapter 17 Configuring Ethernet OAM, CFM, and E-LMI
Configuring Y.1731 Fault Management
Default Y.1731 Configuration
• ETH-AIS and ETH-LCK are enabled by default when CFM is enabled.
• When you configure ETH-AIS or ETH-LCK, you must configure CFM before ETH-AIS or
ETH-LCK is operational.
• ETH-RDI is set automatically when continuity check messages are enabled.
Configuring ETH-AIS
BEFORE YOU BEGIN
Review the “Information About CFM ITU-T Y.1731 Fault Management” section on page 17-24.
DETAILED STEPS
Command Purpose
Step 1
configure terminal Enter global configuration mode.
Step 2
ethernet cfm ais link-status global Configure AIS-specific SMEP commands by
entering config-ais-link-cfm mode.
Step 3
level level-id
or
disable
Configure the maintenance level for sending AIS
frames transmitted by the SMEP. The range is 0 to 7.
or
Disable generation of ETH-AIS frames.
Step 4
period value Configure the SMEP AIS transmission period
interval. Allowable values are 1 second or 60
seconds.
Step 5
exit Return to global configuration mode.
Step 6
ethernet cfm domain domain-name level
level-id
Define a CFM domain, set the domain level, and
enter ethernet-cfm configuration mode for the
domain. The maintenance level number range is 0 to
7.
- System Management Software 1
- CONTENTS 3
- 10 Configuring CDP 10-1 8
- 12 Configuring RMON 12-1 10
- 14 Configuring SNMP 14-1 11
- Contents 12
- A Supported MIBs A-1 14
- Overview 15
- Chapter 1 Overview 16
- Features 16
- Switch Boot Optimization 17
- MAC Address Table 17
- Switch Alarms 18
- SDM Templates 18
- Smartports Macros 18
- LLDP and LLDP-MED 19
- Port-Based Traffic Control 19
- SPAN and RSPAN 20
- System Message Logging 20
- Cisco IOS IP SLAs 21
- Embedded Event Manager 21
- Ethernet OAM, CFM, and E-LMI 22
- Online Diagnostics 22
- Supported MIBs 22
- Boot Process 24
- DHCP-Based Autoconfiguration 25
- DHCP Image Upgrade 26
- TFTP Server 27
- DNS Server 27
- Relay Device 28
- Obtaining Configuration Files 28
- Example Configuration 29
- Assigning Switch Information 33
- Configuring the Client 36
- Booting Manually 40
- First Reload 49
- Administering the Switch 53
- System Clock 54
- Network Time Protocol 54
- Configuring NTP 59
- Configuring NTP Associations 60
- Setting the System Clock 67
- Configuring DNS 72
- Creating a Banner 73
- Configuring a Login Banner 75
- MOTD Banner 88
- Configuring the Switch Alarms 91
- Port Status Monitoring Alarms 92
- Triggering Alarm Options 93
- Configuring External Alarms 94
- Configuring Switch Alarms 97
- Configuring Alarm Profiles 99
- BEFORE YOU BEGIN 100
- DETAILED STEPS 100
- Verifying Configuration 102
- Configuration Example 102
- Related Documents 104
- Feature History 104
- Configuring SDM Templates 105
- • Indirect IPv4 routes – 4 K 106
- Prerequisites 107
- Guidelines and Limitations 108
- Default Settings 108
- Configuring Smartports Macros 113
- Creating Smartports Macros 116
- Applying Smartports Macros 117
- Configuring LLDP and LLDP-MED 121
- LLDP-MED 122
- Disabling LLDP 125
- Enabling LLDP 125
- Configuring LLDP-MED TLVs 127
- Disabling a TLV 128
- Enabling a TLV 128
- Storm Control 134
- Protected Ports 135
- Port Blocking 135
- Port Security 135
- Secure MAC Addresses 136
- Security Violations 136
- Configuring Storm Control 140
- Configuring Protected Ports 142
- Configuring Port Blocking 143
- Configuring Port Security 144
- Configuring CDP 155
- Disabling and Enabling CDP 157
- Enabling CDP 158
- Disabling CDP on an Interface 158
- Enabling CDP on an Interface 159
- Configuring SPAN and RSPAN 163
- Local SPAN 164
- Remote SPAN 164
- SPAN Sessions 165
- Monitored Traffic 166
- Source Ports 167
- Source VLANs 168
- VLAN Filtering 168
- Destination Port 168
- RSPAN VLAN 169
- OL-29255-03 174
- Specifying VLANs to Filter 178
- Configuring RSPAN 179
- Configuring RMON 191
- System Log Message Format 200
- Disabling Message Logging 202
- Synchronizing Log Messages 204
- Verifying the Configuration 214
- Configuring SNMP 217
- SNMP Versions 218
- SNMP Manager Functions 219
- SNMP Agent Functions 220
- SNMP Community Strings 220
- SNMP Notifications 221
- Table 14-3 ifIndex Values 222
- Configuring Community Strings 225
- Event Detectors 244
- CFM Domain 260
- CFM Messages 263
- SNMP Traps and Fault Alarms 263
- Configuration Error List 263
- CFM Version Interoperability 264
- IP SLAs Support for CFM 264
- Configuring Ethernet CFM 265
- Configuring the CFM Domain 266
- Configuring Static Remote MEP 271
- Configuring a Port MEP 273
- Configuring SNMP Traps 275
- Configuring Fault Alarms 275
- Y.1731 Terminology 282
- Alarm Indication Signals 283
- Ethernet Locked Signal 284
- Multicast Ethernet Loopback 284
- Default Y.1731 Configuration 285
- Configuring ETH-AIS 285
- Configuring ETH-LCK 287
- Hold-time: 100 Minutes 292
- Configuring Ethernet OAM 293
- Enabling Ethernet Loopback 305
- Information About E-LMI 309
- Configuring E-LMI 310
- Configuring the OAM Manager 311
- Enabling E-LMI 314
- Enabling Ethernet OAM 319
- Scheduling Online Diagnostics 325
- Chapter A Supported MIBs 334
- MIB List 334
Manuais e produtos relacionados com Software Cisco IE 2000
Software Cisco LRE CPE Especificações
(648 páginas)
(648 páginas)
Software Cisco Cisco Access Registrar 4.2 Especificações
(636 páginas)
(636 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.047 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais