Cisco Octal-Port DMT ATU-C Line Card Manual do Utilizador Página 42

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 50
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 41
Practical Exercise 8-2 Solution 217
Practical Exercise 8-2: RFC 1483 Bridging over DSL
In this practical exercise, lab-827A and lab-827B are connected to the DSLAM and will be
configured using RFC 1483 bridging, as shown in Figure 8-13. DSLAM and NSP configuration
remain the same as in the previous exercise. For this exercise, you will assign the ATM interface
of the CPEs and subinterfaces of the NRP to Bridge group 1. You will see the configuration
output as well as some useful commands to verify the bridging configuration.
Practical Exercise 8-2 Solution
Examples 8-44 and 8-45 show the bridging configurations of both DSL CPE devices.
Check Bytes (FEC):
Interleave Path: downstream: 0, upstream: 0
Fast Path: downstream: 0, upstream: 0
R-S Codeword Size: downstream: 1, upstream: 1
Trellis Coding: In Use
Overhead Framing: Mode 3
Line Fault: NONE
Operating Mode: ITU G dmt Issue 1
Line Type: Fast Only
Alarms:
status: NONE
ATM Statistics:
Interleaved-Path Counters:
Cells: downstream: 20 upstream: 154
HEC errors: downstream: 0 upstream: 2
LOCD events: near end: 1 far end: 0
Fast-Path Counters:
Cells: downstream: 1729 upstream: 660
HEC errors: downstream: 1 upstream: 1
LOCD events: near end: 1 far end: 0
DSL Statistics:
Init Events: 4
Far End LPR Events: 0
Transmitted Superframes: near end: 161749170 far end: 0
Received Superframes: near end: 161748691 far end: 0
Corrected Superframes: near end: 176 far end: 0
Uncorrected Superframes: near end: 369 far end: 1
LOS Events: near end: 2 far end: 0
LOF/RFI Events: near end: 0 far end: 0
ES Events: near end: 10 far end: 1
CPE Info:
Version Number: 0
Vendor ID: 34
Example 8-43 Displaying DSL, DMT, and ATM Status for Port 1/1 (Continued)
0732x01.book Page 217 Monday, November 17, 2003 2:49 PM
Vista de página 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 48 49 50

Comentários a estes Manuais

Sem comentários