
Practical Exercise 8-2 Solution 221
Example 8-47 shows that Bridge group 1 is running the IEEE Spanning Tree Protocol.
Example 8-48 shows the IP and MAC addresses of lab-827A and lab-827B. show arp is a
useful command to verify whether bridging is configured properly.
interface BVI1
ip address 10.2.2.1 255.255.255.0
!
ip classless
ip http server
!
!
!
!
bridge 1 protocol ieee
bridge 1 route ip
!
line con 0
line aux 0
line vty 0 4
!
end
Example 8-47 Displaying the Spanning Tree Protocol (IEEE)
lab-6400NRP#show spanning-tree 1
Bridge group 1 is executing the ieee compatible Spanning Tree protocol
Bridge Identifier has priority 32768, address 0000.0c7f.70fc
Configured hello time 2, max age 20, forward delay 15
We are the root of the spanning tree
Topology change flag not set, detected flag not set
Number of topology changes 4 last change occurred 00:35:16 ago
from ATM0/0/0.235
Times: hold 1, topology change 35, notification 2
hello 2, max age 20, forward delay 15
Timers: hello 0, topology change 0, notification 0, aging 300
Port 6 (ATM0/0/0.135) of Bridge group 1 is forwarding
Port path cost 14, Port priority 128, Port Identifier 128.6.
Designated root has priority 32768, address 0000.0c7f.70fc
Designated bridge has priority 32768, address 0000.0c7f.70fc
Designated port id is 128.6, designated path cost 0
Timers: message age 0, forward delay 0, hold 0
Number of transitions to forwarding state: 1
BPDU: sent 1663, received 2
Port 8 (ATM0/0/0.235) of Bridge group 1 is forwarding
Port path cost 14, Port priority 128, Port Identifier 128.8.
Designated root has priority 32768, address 0000.0c7f.70fc
Designated bridge has priority 32768, address 0000.0c7f.70fc
Designated port id is 128.8, designated path cost 0
Timers: message age 0, forward delay 0, hold 0
Number of transitions to forwarding state: 1
BPDU: sent 1527, received 1
Example 8-46 Configuration Output for lab-6400NRP (Continued)
0732x01.book Page 221 Monday, November 17, 2003 2:49 PM
Comentários a estes Manuais