Cisco 15310-MA Guia de Resolução de Problemas descarregar pdf (Página 119)

1-83

Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, Release 9.0

78-18394-01

Chapter 1 General Troubleshooting

Circuits and Timing

1.11.4 Circuit Creation Error with VT1.5 Circuit

Symptom You might receive an “Error while finishing circuit creation. Unable to provision circuit.

Unable to create connection object at node-name” message when trying to create a VT1.5 circuit in CTC.

Table 1-25 describes the potential causes of the symptom and the solutions.

1.11.5 OC-3 and DCC Limitations

Symptom There are limitations to OC-3 and DCC usage.

Table 1-26 describes the potential cause of the symptom and the solution.

1.11.6 ONS 15310-CL or ONS 15310-MA Switches Timing Reference

Symptom Timing references switch when one or more problems occur.

Table 1-27 describes the potential causes of the symptom and the solutions.

Table 1-25 Circuit Creation Error with VT1.5 Circuit

Possible Problem Solution

You might have run out

of bandwidth on the VT

cross-connect matrix at

the node indicated in the

error message.

The ONS 15310-CL matrix has a maximum capacity of 336 bidirectional

VT1.5 cross-connects. The ONS 15310-MA capacity is 1,064.

Table 1-26 OC-3 and DCC Limitations

Possible Problem Solution

OC-3 and DCC have

limitations for the

system.

For an explanation of OC-3 and DCC limitations, refer to the “DCC

Tunnels” section in the Cisco ONS 15310-CL and Cisco ONS 15310-MA

Procedure Guide.

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 379 380

Sem comentários

Cisco 15310-MA Guia de Resolução de Problemas Página 119